Xantrex Freedom HF Inverter
This Xantrex Freedom HF inverter is a discounted, single item from the AVC RIG shop.
Xantrex Freedom HF Inverter Details
- 1800w inverter
This Xantrex Freedom HF inverter was originally used for Orton method charging. We replaced it with a higher voltage alternator. So this 1800w inverter is now available.
If your charging plan does not use a higher voltage alternator, it may still suit your build. Once this Xantrex Freedom HF inverter sells, it is gone.
Check specs and manuals at Xantrex before you buy.
Xantrex Freedom HF 1800 Specs
Xantrex sells the Freedom HF 1800 as an inverter/charger. Here is what their product page lists for it:
- 1800W continuous, 3600W surge
- Built-in 40A battery charger
- 12V battery, 10.5 to 15.5V DC operating range
- AC input range: 90 to 130V AC
- 30A automatic transfer switch
- Dual GFCI outlet and/or hardwire AC output, with quick-connect AC terminals
- Modified sine wave output
- Detachable digital remote panel and ignition lockout
- 4.2 x 9.5 x 18.5 inches, 12.8 lb
- ETL certified to CSA C22.2 No. 107.1 and UL458 with marine supplement
The 40A charging side runs off shore power through the transfer switch. Note the modified sine wave output when you plan which loads to run. Full details are on the Xantrex Freedom HF 1800 page.
Is It Right for Your Van?
This Xantrex Freedom HF inverter makes sense if you want one box for 120V outlets and shore charging. It is a 12V unit, so it suits a 12V house battery bank. At 12.8 lb and under 19 inches long, it can fit under a bed or in a cabinet. The detachable remote panel can mount where you can see it. If you need pure sine power for sensitive electronics, look at a different 1800w option instead.
Related Electrical Parts
Also on clearance: an open box Victron Phoenix Inverter 12/1200. For whole-van power, see the EcoFlow 5 kVA Power Kit.
