The 11 gallon Sprinter undercarriage tank (SP-UC-11) claims the unused space under your slider door without drilling a new hole in your floor. AVC RIG carries this NW Conversions tank from GoCode.
About the 11 Gallon Sprinter Undercarriage Tank
It mounts between the Sprinter's frame and the passenger-side slider door step cutout, using otherwise wasted undercarriage space. It is ideal as a dedicated grey tank paired with a larger fresh water setup. It can also be used on its own for fresh water.
Gas engine Sprinters: the exhaust runs closer to the frame on gas models. A heat shield (not included) should be installed between the tank and exhaust before use.
11 Gallon Sprinter Undercarriage Tank Specs
- Nominal dimensions: 38" L x 12.5" W x 9.875" H (actual dimensions may vary up to 1.5% each)
-
Capacity: 11 gallons
-
Dry weight: 12 lbs
-
Filled weight: 104 lbs
-
Recommended sensor: KUS S5U-8
-
Recommended heating pad: Facon CW-T1218 (x2)
- Not designed for pressurized systems, must be vented
Materials and Certifications
- BPA-free, food-grade polyethylene
- IAPMO TS 4 Certified
- Made in the USA
- TEi listed and RVIA approved


What's Included
- Water tank
- (2) stainless steel laser-cut mounting straps
- Stainless 3/8" hardware and 3/8" rivnuts
- Note: rivnut tool required, not included
Ports and plumbing:
- (1) 1.5" NPT port on the rear-facing end
- (2) 1/2" NPT ports on the rear-facing end
- (1) 1.5" NPT port on top
Compatibility
- Mercedes Sprinter 1500/2500/3500 (2007-present), wheelbases 144", 170" and 170" EXT
- Passenger side, under the slider door step area
- May fit other makes and models, confirm dimensions before ordering
- Compatible with AMP Research PowerStep Electric Running Boards for 2019-2021 Mercedes Sprinter (part #76264-01A), and may be compatible with other running boards

Planning Your Water System
The 11 gallon Sprinter undercarriage tank is not designed for pressurized systems, so plan a vent. Filled, it weighs 104 lbs. Have a rivnut tool ready, since it is not included. As a grey tank, pair it with a larger fresh water tank.
Shipping and Lead Time
Ships in 1-2 business days.
Note: Despite great care during manufacturing and fulfillment, plastic tanks can get dirty or scuffed in transit. This does not mean the tank is damaged. Plastic tanks can also warp slightly, especially on flat surfaces. This is normal and does not make the tank defective. A perfectly flat surface on a rotationally molded part is not always possible. Every effort is made to keep surfaces within a 1.5 degree tolerance.
Resources
For more capacity on the driver side, see the 22-gallon Sprinter undercarriage tank. Shop more Sprinter van conversion parts.